Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: Chriz74x on June 03, 2024, 06:02:51 am
-
Hello. I have an old arcade with an electrohome g07-cbo monitor. I modified the sync setting to negative to accept a raspberry pi with pi2jamma / pi2scart. The sync works but I can see the picture is distorted in the upper side (right side in the picture ) and has a negative cushion on the right (bottom in the picture). Also it seems a little rotated to the right. Do I need to recap this ? What can I check ? Thanks.
(https://i.ibb.co/wLXr30G/C1246-BB9-689-D-40-E5-89-B1-DC75-FB3-CF47-B.jpg)