The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: uha666 on April 23, 2022, 06:57:07 pm

Title: Hantarex Polo Star 28 with Pandora 5S
Post by: uha666 on April 23, 2022, 06:57:07 pm

Hi,

I recently aquired a arcade machine with a 28" Polo Star setup.

I hooked up a pandora 5S, to it, using the vga connector, but i only displays half image.
Initially i thought it would be a frequency issue since i saw some users stating the for the VGA mode a SVGA polo star was needed since.

But after switching back to the RGB connector the image is still the same.

I attached a picture of the issue.

I already tried ajusting the POTS but the horizontal ones have no effect.

Any help would be appreciated.

Regards

Title: Re: Hantarex Polo Star 28 with Pandora 5S
Post by: grantspain on May 01, 2022, 04:10:49 pm

there are frequecy pots for each res on the east/west board located in the centre of the chassis, pots are on the top