The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: MKFan4Life on August 28, 2021, 07:57:20 am

Title: K7000 Schematic error
Post by: MKFan4Life on August 28, 2021, 07:57:20 am

Probably been found long ago, but has anyone else noticed the K7000 schematic has R74 listed as R14? It's a 22 Ohm by T2. The real R14 is over by those 3 BiPolar caps.

I just noticed this when looking at the K7000 schematic and the one for the K7191 floating around (which,although a poor scan, has it as R74 correctly).

BTW, the real R14 is listed as a 1K on both schematics and the parts list, but the color bands on R14 on two different boards I have (K7197 & K7131) indicate it's 470 Ohm. The bands are yellow, violet, brown, gold. My eyes are getting old, but that's what they both appear to be. Those measure in circuit as 451 & 473 Ohms.

 :o

Title: Re: K7000 Schematic error
Post by: princess prin prin on August 29, 2021, 09:19:05 am

Yes, the 19K7000 schematics have that mistake. K7000A schematics are correct in this respect. R13/14/15 are 1K on early versions: