Print Page - Act Labs Light Gun

Does anyone know if the Act Labs guns work on Linux, or what it takes to get them working on Linux? Linux is seeing the device and registers a mouse:

Code: [Select]

[    4.391611] input: ACT LABS ACT LABS PC USB Light Gun as /devices/pci0000:00/                                                                                                                                                                                                                                             0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:061C:A700.0002/input/input4
[    4.391660] hid-generic 0003:061C:A700.0002: input,hidraw1: USB HID v1.10 Poi                                                                                                                                                                                                                                             nter [ACT LABS ACT LABS PC USB Light Gun] on usb-0000:00:1d.0-1.3/input0

But even after using the switch calibration, it never aims anywhere. Any thoughts or are these things only working in Windows?

Hi, i'm new in the board
I have installed GroovyArcade in my cab with Hantarex 20" Atom-15 in HD5450 all working flawless but
Act-Labs lightgun recognised and work fine in LXDE desktop and in Groovymame interface, but when start the game the gun stop working,
the white screen flash anyway but the pointer go in the bottom-right corner
and game input show mouse xy if try to set gun
In windows 10 same configuration work and show lightgun and mouse in input game selection
Someone can help?
Thanks and
sorry for my bad english

On GitHub i find this "https://github.com/mamedev/mame/commit/526e2cb3b10557ed610fcb8cda440e473dbd98f9" for the AimTrack
I tried with Act-Labs idvendor and idproduct but i don't know if i write files correctly
I was unable to make it work
I'm a beginner :banghead:

The NEW Build Your Own Arcade Controls

Main => Lightguns => Topic started by: SteelRush on April 25, 2020, 09:04:56 pm