The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: abispac on April 16, 2020, 02:04:05 pm
-
Hey so i got me 2 weiya chassis, one was kind of weak the other one it trid to fix it with the weak one parts.
But once i replaced the caps, that danm cap started to short to the potin where i can see smoke comming out of it. Now i dont remember the values of the caps in order to change them again and cant seem to find some schematics. One chassis model is model-700 the other is hs-2002. I apreciate any help. Thanks.
-
you are making a right mess of this, why would you use parts from non fully working chassis to fix another
show us a photo of where the cap is, solder and component side
-
you are making a right mess of this, why would you use parts from non fully working chassis to fix another
show us a photo of where the cap is, solder and component side
well i asumed that the falty chassis only had vertical issues, and the caps i used for the other chassis looked good, since they are very very similar i though i was gonna work. its the 3 caps on the side of the giant cap
(https://i.ibb.co/KwrKBj6/3.jpg) (https://ibb.co/KwrKBj6) chassis model hs-2002
-
I just bought 2 more chassis , hopefully i can see the caps values and give it one more try, ill still would like to find some schematics. :cheers:
-
Why not contact the manufacturer?
http://www.weiya.com.tw/
-
:laugh2:
Why not contact the manufacturer?
http://www.weiya.com.tw/
:laugh2: man , ive been searching all over the web, and you never get tired of giving that advice, but you know what? you are so correct, i allready sent them an email , hope the come up with an answer. Thanks man. :cheers: