Build Your Own Arcade Controls Forum

Arcade Collecting => Arcade1Up & Similar => Topic started by: jahilbert on March 15, 2020, 01:30:53 am

Title: Cyberball 2072 Mod - Two Linked cabinets
Post by: jahilbert on March 15, 2020, 01:30:53 am

I'm starting a Cyberball 2072 mod with two cabs. My hope is to build a riser that links the two cabs and they can mirror screens and be a 4 player cab. I'm worried about the right ROM but I hope this is a killer setup that has all of the games and systems and is the end all e all setup for my garage and my kids!

(https://www.facebook.com/photo.php?fbid=10219632704662392&set=gm.4078615878830661&type=3&eid=ARCFAs0nRKEUpLF1Qy_5PPH4aVpX_yaqM7PmX_hSFJNGxF38tjMhMlj4ldLPsPUPnDPKf2hbmdue2Oro&ifg=1)

(https://scontent-sjc3-1.xx.fbcdn.net/v/t1.0-9/88057216_10219681192714563_8872481193115779072_n.jpg?_nc_cat=100&_nc_sid=07e735&_nc_ohc=vwfXafaLtJcAX9TdUl7&_nc_ht=scontent-sjc3-1.xx&oh=d1a46d2886eeb920d68f28b3a1c2a57e&oe=5E951D37)

(https://www.facebook.com/photo.php?fbid=10219613959433773&set=gm.4071851029507146&type=3&eid=ARArCd6PfBzTvsXPNHI5ATGxwcwCxAarjNWUjl7BMeC14xddV_6-tc42r0KLTsPa0SkeAiViEUREhg_s&ifg=1)

Title: Re: Cyberball 2072 Mod - Two Linked cabinets
Post by: jahilbert on March 15, 2020, 01:33:03 am

(https://scontent-sjc3-1.xx.fbcdn.net/v/t1.0-9/86700841_10219632704702393_549927071413960704_n.jpg?_nc_cat=104&_nc_sid=ca434c&_nc_ohc=28mdnUsy014AX_dGpk_&_nc_ht=scontent-sjc3-1.xx&oh=c42082843abbf30ae52d01bf4cfff740&oe=5E94ACBA)

(https://scontent-sjc3-1.xx.fbcdn.net/v/t1.0-9/s960x960/86375062_10219613959513775_8119854815204343808_o.jpg?_nc_cat=107&_nc_sid=ca434c&_nc_ohc=OuJr_GELp1IAX_EL38x&_nc_ht=scontent-sjc3-1.xx&_nc_tp=7&oh=d1e19a6134f1b7c3c485f32430e1fda3&oe=5E940390)

Title: Re: Cyberball 2072 Mod - Two Linked cabinets
Post by: Zeosstud on March 15, 2020, 08:18:52 am

Looks like fun.. Hope it comes out just the way you want it to..

Title: Re: Cyberball 2072 Mod - Two Linked cabinets
Post by: jahilbert on March 19, 2020, 08:32:55 pm

Progress........

Made a center wedge to link the cabinets and for the center decal. Cup holders on top. Work on cabinets and progamming pi next week (or when amazon gets me the stuff!)

(https://scontent-sjc3-1.xx.fbcdn.net/v/t1.0-9/89962805_10219912845745744_4725846824680685568_n.jpg?_nc_cat=107&_nc_sid=07e735&_nc_ohc=N0A8eVkx1WIAX-TCluu&_nc_ht=scontent-sjc3-1.xx&oh=2969767998c01062236236c9bd1c2678&oe=5E9ACEC0)

(https://scontent-sjc3-1.xx.fbcdn.net/v/t1.0-9/90523917_10219912846345759_2265029468303130624_n.jpg?_nc_cat=111&_nc_sid=07e735&_nc_ohc=SQ-ZaUXFrioAX-EMVKj&_nc_ht=scontent-sjc3-1.xx&oh=6770f9e3c2077bb5bcd0507697c06893&oe=5E9AD240)

(https://scontent-sjc3-1.xx.fbcdn.net/v/t1.0-9/90439143_10219912847465787_6042404422896582656_n.jpg?_nc_cat=108&_nc_sid=07e735&_nc_ohc=9u2JooRgbQoAX-QBCeB&_nc_ht=scontent-sjc3-1.xx&oh=19e85ac10138345df0343291cdbfc069&oe=5E984127)