The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: Mistouch on March 04, 2020, 01:12:56 pm
-
Originally posted in the groovymame thread, thought I should cross post incase it falls under the monitor thread.
Monitor: Nanao MS8 29FSG
Radeon HD 7570 SFF
Hooked up from the DVI-I to VGA to jpac/jamma
Followed the instruction guide found on geedorah forum to get the driver set with 15khz however at the end where I hit the "enable edid emulation" the image on the Nanao monitor displays a mess which I have no idea why.
New to the arcade hobby so I might be missing something. Image looks to be squished and all scrambled.
Settings
(https://i.imgur.com/5gc2Mcm.png)
On the monitor screen. Looks to be a scrambled version of my desktop screen
(https://i.imgur.com/6a1nQ2T.png)
-
I might be behind the curve but I didnt think that you could get a 15 khz signal via a DVI port even with an adapter. That scrambled signal looks like what I have seen when the signal is not correct. The card you are using has to have an analog out VGA. But my information might be outdated since I built my cabinet.
-
That's a sync issue. It is possible to sync with a dvi-i to vga passive adapter.