Build Your Own Arcade Controls Forum
Main => Audio/Jukebox/MP3 Forum => Topic started by: Piss Ant on February 05, 2004, 02:25:52 pm
-
I'm in a rural area & having trouble locating 4x6" rectangular speaker grills for my project. Local audio store is a no go & I can only find circular ones on the net. I've found entire 4x6" speaker sets, but not just the grills. Can anyone help me out? Any suggestions would be appreciated. :)
Thanks!
-
I would try wal*mart and the like.
-
Found some at Radio Shack.
-
Thanks for the suggestions - but I struck out :'( Our Radio Shack has discontiued them & While Wal-Mart has many items they don't carry them either. I'll see if I can't find another electornics store - or anyone know of a internet site.
Thanks!
-
Humm.... You might also wan to try BestBuys or maybe an auto parts store like Autozone...
-
One more option, and you may get a little dirty ... ;D
I've had even better luck going to some old junkyards and ripping out a few of the grills from beat-up cars and trucks.
As always , you'll more than likely find the radio and speakers missing, but the grills are still in place. Grab a few, and at the most, you'll probably pay about $2.00 for a handful.
-
Thanks Nighthawk2099 - No Best Buys/CC's etc anywhere near me. However we do have an Autozone.
Thanks General Zod, that's one I definately hadn't thought of.
-
When I had to find speaker grills I called used car dealers until I found some.
Junk yards and Ebay are a good bet too
or maybe contact the speaker manufacturer and see what they recommend
this google search found some from porche and chevy :
http://www.google.com/search?hl=en&ie=UTF-8&q=4x6+Speaker+Grills+
lastly, if the speakers are cabinet mounted you could cut that cabinet into grills with a router as seen in the attached picture
Dig it?
Craig
-
www.partsexpress.com they have alot of stuff like that
-
they have a lot of stuff 'like' that...but they don't have any 4x6" grilles...
i too...am on a search for 4x6" speaker grilles...and through my googling...i was lead to the good ol' byoac boards...to this very thread...-=)
i already searched partsexpress.com before coming here...
i'm thinking of just making my own...all i'd have to do is buy some fabric and make a couple of frames...
-
Try this place
http://www.magnadyne.com/index.cfm/MasterAction/WebCat/Web_CatID/264.cfm
or
http://store.cal-mustang.com/showdetl-7-3537-19-0.html
hope this helps.
-
ah...yes...!
thanks...!