The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: wisker27 on October 25, 2017, 09:42:17 pm

Title: Monitor Help No Picture
Post by: wisker27 on October 25, 2017, 09:42:17 pm

Hello,
I have a goldentee 2005 that i am trying to get the monitor working, i know the game works as i can hook a regular monitor to it and it shows pic.

I have no picture at all on the monitor that is in it, i did not have any discharge from the cap even after being plugged in for a bit.
The monitor is a neotec nt-500, i assumed the flyback was bad and purchased a new one, the new replacement has a extra white wire that my old one didnt? Could i get clearification on which wire goes to the neck and what would the other be for? or did i get the wrong flyback.

I am still not getting any discharge from the cap and no neck glow, fuse tested good so what would my next step be to figure out why im not getting and discharge is the flyback not working? I attached original and the new one installed.

Thanks

Title: Re: Monitor Help No Picture
Post by: wisker27 on October 25, 2017, 10:48:11 pm

On the primary side im getting 121v and on the secondary side im getting 121volt but on the board it says different voltages is that right?