The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: kirby_blue on October 18, 2017, 05:13:23 am
-
Hello there !
I have been trying to setup an arcadeVGA card without much luck up to now :(
A few months ago, I posted a request for help on the french forum Gamoover http://www.gamoover.net/Forums/index.php?topic=36994.0 (http://www.gamoover.net/Forums/index.php?topic=36994.0) but got no reply. Since arcadecontrols seems to be the "official" channel for requesting help on arcadeVGA, you are my last hope ;D
EDIT:
I contacted Ultimarc about my issue and they told me that the official support channel is to contact them directly.
My setup :
AMD Athlon X4 with windows 10
ArcadeVGA 5000
J-PAC
Hantarex monitor
And an old ASUS 4:3 flat LCD monitor, just to perform checks
The issue :
No image on the arcade monitor unless I do the following :
Boot with only the LCD plugged in
When in Windows, plug the arcade monitor
If I don't do this, I get a black screen on the arcade monitor and an "Unsupported resolutions" message on the LCD.
Any idea ?
Thanks
-
What happens when you swap the monitor ports over?
-
What happens when you swap the monitor ports over?
"Unsupported resolutions" on LCD and nothing on arcade monitor :-\
-
Worth a shot :)
I really feels like a detection issue, but i'm not sure how the AVGA cards work in that regard.
You have a fair chunk of Ultimarc hardware there, and Andy from Ultimarc is known for following up. See if you can get in contact with him through the site.
-
So I have a last last hope now ;)
Thanks