Post by: Termin8tor on October 10, 2015, 11:03:15 am
Post by: Superfrog on October 10, 2015, 06:35:07 pm
Nice to see some action again :applaud:
Post by: Termin8tor on October 11, 2015, 06:26:48 am
Welcome back Paul :cheers:
Nice to see some action again :applaud:
Cheers. :cheers:
Here's a better pic.
Post by: Termin8tor on October 13, 2015, 06:03:46 am
Post by: Termin8tor on October 14, 2015, 11:24:05 am
Post by: vwalbridge on October 14, 2015, 11:32:41 am
sand, prime and paint.
Hopefully not in that order. There is really no need to sand MDF. (unless the edges)
I normally prime, sand then paint.
Post by: Slippyblade on October 14, 2015, 11:49:44 am
Hopefully not in that order. There is really no need to sand MDF. (unless the edges)
Not to mention the amount of nasty ass dust that sanding MDF would create.
Post by: Termin8tor on October 14, 2015, 11:58:44 am
Post by: Termin8tor on October 14, 2015, 12:11:05 pm
Post by: vwalbridge on October 14, 2015, 12:17:12 pm
My process is seal the edges, sand, prime, sand, prime, paint, wetsand, paint, lacquer, sand and buff. Aiming for a nice mirror finish.
Oh my. Well then, you should be fine then! :cheers:
Post by: artyfarty on October 16, 2015, 10:01:19 am
Sent from my iPad using Tapatalk
Post by: Frank Drebin on October 16, 2015, 11:26:12 am
Post by: pbj on October 16, 2015, 12:01:16 pm
Post by: Termin8tor on October 17, 2015, 11:12:24 am
What lacquer do you use?A high gloss. Must be the same brand as the paint though
Post by: Termin8tor on January 27, 2016, 02:21:53 pm
Post by: Don on January 27, 2016, 02:27:36 pm
Post by: harveybirdman on January 27, 2016, 02:31:38 pm
Anyways, nice to see you working on this one again, I had forgotten about it.
Post by: tomstewdevine on January 27, 2016, 05:37:40 pm
You should have seen his Arkanoid bartop.... it was on Fleck (I think I'm using that right)
Anyways, nice to see you working on this one again, I had forgotten about it.
On Fleek (so close to using that right)
Post by: tomstewdevine on January 27, 2016, 05:41:03 pm
Post by: Termin8tor on November 05, 2016, 05:46:21 pm
Post by: Titchgamer on November 06, 2016, 04:01:56 am
Post by: Termin8tor on November 06, 2016, 11:05:18 am
Post by: yotsuya on November 06, 2016, 11:11:06 am
Post by: Termin8tor on November 06, 2016, 11:13:57 am
Post by: Titchgamer on November 06, 2016, 01:05:15 pm
Barcade is pretty generic lol
Post by: yotsuya on November 06, 2016, 01:45:44 pm
Yeah liking the look on that.Dude, STFU. :cheers:
Barcade is pretty generic lol
Post by: yotsuya on November 06, 2016, 01:46:04 pm
Barcade is pretty generic lolDude, STFU. :cheers:
Post by: Titchgamer on November 06, 2016, 01:48:01 pm
Barcade is pretty generic lolDude, STFU. :cheers:
Dude u quoted your own quote!
Get a drink lol
Post by: yotsuya on November 06, 2016, 01:52:01 pm
Go play with your lappy, brah.Barcade is pretty generic lolDude, STFU. :cheers:
Dude u quoted your own quote!
Get a drink lol
Post by: Titchgamer on November 06, 2016, 02:02:25 pm
Post by: yotsuya on November 06, 2016, 02:04:10 pm
Aint Christmas yet ;)Are you asking Father Christmas for one? ;-)
Post by: Le Chuck on November 06, 2016, 02:08:39 pm
So if you are going to play a lot of classics call it, "8-bit Spectrum" or something vague like that
If it's a go right and fight cab call it, "Final Boss" or "Next Level" ya get the idea
other short name ideas: Raster, Pixel, Excite, Station 1, Blaster, Twitch
Post by: Titchgamer on November 06, 2016, 02:12:42 pm
Aint Christmas yet ;)Are you asking Father Christmas for one? ;-)
Nah mate its that time of the year the ladies sit on my lappy and tell me what they want ;)
Post by: yotsuya on November 06, 2016, 02:17:19 pm
Post by: yotsuya on November 06, 2016, 02:19:09 pm
They sit on your laptop? Does it end up smelling like ass? :cheers:Aint Christmas yet ;)Are you asking Father Christmas for one? ;-)
Nah mate its that time of the year the ladies sit on my lappy and tell me what they want ;)
Post by: Titchgamer on November 06, 2016, 02:21:09 pm
Dont think spectrum would fit though ;)
Maybe ZX or something lol
Post by: Termin8tor on November 06, 2016, 02:27:33 pm
I like "Spectrum".Might have to change the colours from lines, didn't realise it looks similar to the" zx spectrum". The colours are taken from Pacman. I probably won't be keeping it as I already have an upright. That's why I want a generic name
Post by: yotsuya on November 06, 2016, 02:32:58 pm
Wait, so this is a flip build?I like "Spectrum".Might have to change the colours from lines, didn't realise it looks similar to the" zx spectrum". The colours are taken from Pacman. I probably won't be keeping it as I already have an upright. That's why I want a generic name
(http://uploads.tapatalk-cdn.com/20161106/47ab6da97fde508b0df1b1609b91ea31.jpg)
Post by: Termin8tor on November 06, 2016, 02:46:54 pm
Not really a flip, I started over a year ago. It's the building I enjoy. I usually build them strip and build again. Just don't have the room. I just keep the Marquee.Wait, so this is a flip build?I like "Spectrum".Might have to change the colours from lines, didn't realise it looks similar to the" zx spectrum". The colours are taken from Pacman. I probably won't be keeping it as I already have an upright. That's why I want a generic name
(http://uploads.tapatalk-cdn.com/20161106/47ab6da97fde508b0df1b1609b91ea31.jpg)
Post by: Termin8tor on November 06, 2016, 02:49:42 pm
Post by: Termin8tor on November 06, 2016, 03:02:43 pm
First build: http://forum.arcadecontrols.com/index.php/topic,105527.msg1117444.html#msg1117444 (http://forum.arcadecontrols.com/index.php/topic,105527.msg1117444.html#msg1117444)
Neo Geo build: http://forum.arcadecontrols.com/index.php/topic,109421.msg1159594.html#msg1159594 (http://forum.arcadecontrols.com/index.php/topic,109421.msg1159594.html#msg1159594)
Post by: yotsuya on November 06, 2016, 03:08:16 pm
Added the original Arkanoid spinner to my full size cab.How did you interface it? I have an original Arkanoid spinner I might want to repurpose.
Post by: Termin8tor on November 06, 2016, 03:12:40 pm
Added the original Arkanoid spinner to my full size cab.How did you interface it? I have an original Arkanoid spinner I might want to repurpose.
OptiPac
Post by: Termin8tor on November 06, 2016, 03:22:15 pm
Post by: Termin8tor on November 07, 2016, 01:19:26 pm
Post by: Superfrog on November 08, 2016, 06:30:08 am
I would go for more graphics for this one to pop it up a bit.
Just like the great arkanoid bartop :notworthy:
I'm still busy with other stuff, bud new plans are aready in my head. >:D
Post by: Termin8tor on November 08, 2016, 03:13:08 pm
Good to see a new build from you Paul :cheers:
I would go for more graphics for this one to pop it up a bit.
Just like the great arkanoid bartop :notworthy:
I'm still busy with other stuff, bud new plans are aready in my head. >:D
Yeah, had a bit of time off. But I've had this build laying around unfinished for about a year, time to get it finished me thinks. I hear you about the graphics, might come up with something else once it's finished, just need to get it done now. You working on anything at the moment?