The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: Jetto Funk on December 20, 2003, 02:19:44 pm

Title: Does the chassis matter?
Post by: Jetto Funk on December 20, 2003, 02:19:44 pm

I believe my Kortek chassis is fried, would it matter if I put a differnt chassis on my tube?

Title: Re:Does the chassis matter?
Post by: tom61 on December 20, 2003, 03:33:05 pm

As long as the chassis is compatable with your tube, no problem. See the 8liner's chassis thread for more info.

Title: Re:Does the chassis matter?
Post by: Ken Layton on December 21, 2003, 01:41:40 am

If I remember correctly, the Kortek chassis uses a high impedance vertical yoke (30 to 60 ohms). Measure the resistance of the green and yellow yoke wires to be sure. I think you have the ten pin connector on the picture tube (29mm neck diameter).