The NEW Build Your Own Arcade Controls
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Encryptedmind on December 09, 2014, 06:38:46 pm
-
Hey Im new to this site and I have a question regarding if I can upgrade my golden tee fore 2005 to a complete? I have a green PCB with u15 2.09 boot rom. If someone could direct me in the right direction that would be greatly appreciated. Thanks in advance
-
u will need u53 and a good copy of complete
with 2.09 your boot rom is just fine
ed
-
Where Would i find that stuff?
-
U53 is the security key. if it doesn't match the # required for the software on the harddrive it won't run.
ebay is your best bet, you should be able to buy a key and drive combo.
-
Hi,
I have a GTFore Complete board with a dead HDD....can I download the CHD somewhere?
Luckily I have another drive from a dead GT2005 (not a complete)
So i was thinking I could put the image on that to say upgrading to the 2.09 boot rom....
Once I can get it all working, I am happy to upgrade to 2.09 and a CFcard, but need to get it working first.
Thanks
-
can I download the CHD somewhere?
Per Rule 5 (http://arcadecontrols.com/arcade_message_rules.html), please do not ask where to download CHDs/ROMs. :police:
Scott
-
u are a tad confused here
to start with u want to have 2.09 in frist
this way u will not run smack into wrong harddrive installed >2.09< fixed that
nasty nag,second if u do swap ? make sure u get u53 or it is for not
u53 carry's the s/w serial #
so 2005 to 2005 is fine 2005 to complete is a no no without u53
same as what shawn explained to the other nick ebay is as good as it get's
ed