The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: HaRuMaN on September 09, 2014, 10:26:17 am
-
So I am building a bartop, using an R-Type II pcb and LCD screen.
I picked up a Gonbes converter, like this: http://www.ebay.com/itm/180833084570 (http://www.ebay.com/itm/180833084570)
I've had good luck with these in the past.
Now, when I hook the board up and connect to the monitor via VGA, I get a picture, but it jumps up and down vertically, enough to make it unplayable.
I also have one of these boards : http://www.ebay.com/itm/260868532793 (http://www.ebay.com/itm/260868532793)
It outputs composite and S-video. Now, with these signals, the picture is stable, but the bottom part of the picture is cut off (which is needed for R-Type II).
I've hooked up a JROK sync cleaner and it didn't help.
Any other ideas?