The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: Sarver Systems on July 04, 2014, 11:46:06 am

Title: Help identify and troubleshoot a monitor please?
Post by: Sarver Systems on July 04, 2014, 11:46:06 am

Model:
Pertronic

Game:
ATARI Rush the Rock (driving game)

Size:
25"?

Symptoms:
No neck glow

Troubleshooting:
Game plays blind
110VAC is measured at the input
Fuse tests as good
Flyback appears to have orange "glue" around 1 of the seams.

There were no other markings at all to be found. I wish I had more info to go on.

So, my questions are: What chassis is this? And would a bad flyback cause the monitor to not turn on AT ALL?

Title: Re: Help identify and troubleshoot a monitor please?
Post by: Malenko on July 04, 2014, 12:03:01 pm

a picture is worth a thousand words

Title: Re: Help identify and troubleshoot a monitor please?
Post by: Sarver Systems on July 04, 2014, 12:20:41 pm

I wish I had one. My phone was at the time (stupid phone!)

Title: Re: Help identify and troubleshoot a monitor please?
Post by: ed12 on July 04, 2014, 12:36:30 pm

pm or call rickn
thats 1 of his babeys

ed

Title: Re: Help identify and troubleshoot a monitor please?
Post by: Rickn on July 04, 2014, 06:30:20 pm

Please e-mail diirect. Rick@niemandisplays .com
Give me the model # and Pictures of the chassis and tube, remind me of the symtoms.

Rick

Title: Re: Help identify and troubleshoot a monitor please?
Post by: Sarver Systems on July 04, 2014, 08:44:16 pm

Email sent Rick, thank you!

Title: Re: Help identify and troubleshoot a monitor please?
Post by: Silverball84 on July 05, 2014, 10:31:56 pm

Had a couple rush the rock Alcatraz machines that had neotec nt-2501. The HOT went out and all it did was chirp.

Title: Re: Help identify and troubleshoot a monitor please?
Post by: Sarver Systems on July 06, 2014, 01:16:18 am

I took some better pics of both monitors.

I'll post them in a little while.

Title: Re: Help identify and troubleshoot a monitor please?
Post by: Sarver Systems on July 07, 2014, 10:37:18 pm

Here are the pics:

(https://scontent-a-iad.xx.fbcdn.net/hphotos-xap1/t1.0-9/10378096_10203326016303197_940682270276413539_n.jpg)

(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/10421285_10203326017743233_186152966007514870_n.jpg)

(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10487337_10203326017023215_1871866979233763801_n.jpg)

Title: Re: Help identify and troubleshoot a monitor please?
Post by: ed12 on July 07, 2014, 10:54:12 pm

that is rickn's
288 or 289
i can tell by the fet power supply board >little daughter board< on the heat sink

ed

Title: Re: Help identify and troubleshoot a monitor please?
Post by: ed12 on July 07, 2014, 11:13:14 pm

lets see

ed

Title: Re: Help identify and troubleshoot a monitor please?
Post by: Sarver Systems on July 07, 2014, 11:29:01 pm

Thanks ed.

I was also asking a close friend, and he came to the same conclusion, it being a CH-288.

So there we have it! Its, a CH-288.

So, whats wrong with it???

Title: Re: Help identify and troubleshoot a monitor please?
Post by: ed12 on July 07, 2014, 11:35:33 pm

nope chk the daughter board
it is the fet  for the power supply...
Troubleshooting:
Game plays blind
110VAC is measured at the input
Fuse tests as good
Flyback appears to have orange "glue" around 1 of the seams.

There were no other markings at all to be found. I wish I had more info to go on.

So, my questions are: What chassis is this? And would a bad flyback cause the monitor to not turn on AT ALL?
<

u have to remove the heat sink around the flyback to see the chassic #

your welcome

there is crip notes here.
there is slow start cap that need's to be replaced and a resistor on that daughter board
also the fet is an old ball.. will give u a more ready one
once i look up my crip notes

ed

Title: Re: Help identify and troubleshoot a monitor please?
Post by: Sarver Systems on September 05, 2014, 01:09:45 am

ed, any luck on this? I've started working on it again from square one today.