The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: FullmetalHeart on July 01, 2014, 05:15:39 pm

Title: WG 25K8112 Single Horizontal line
Post by: FullmetalHeart on July 01, 2014, 05:15:39 pm

Inside a former Virtual fighter 1. I don't know how to wire up the monitor to the isolated transformer and thats if I can use the transformer that I have. It came out of a Marvel Superheros vs Capcom cabinet. I think the monitor is a WG k8000 and I'm trying to put tekken 3 in the cabinet.


(http://i.imgur.com/Jur6k4w.jpg)
(http://i.imgur.com/cxIyaNh.jpg)
(http://i.imgur.com/4rpa5Oh.jpg)
(http://i.imgur.com/rDBxoA6.jpg)

Title: Re: Powering arcade monitor ?
Post by: FullmetalHeart on July 02, 2014, 12:43:19 am

Blown cap I had to change  :dunno

(http://i.imgur.com/uK3iI0X.jpg)

Title: Re: Powering arcade monitor ?
Post by: FullmetalHeart on July 05, 2014, 09:09:07 pm

I picked up another Isolation Transformer. IDK if I can use this one either.  Any Help?


(http://i.imgur.com/vl0oJo0.jpg)

Title: Re: Powering WG K8000 ?
Post by: FullmetalHeart on July 06, 2014, 08:49:23 pm

There really isn't much info about this monitor online but after hours upon hours I found out how to power the monitor. The 4 wires 2 red 2 orange required 2 different vacs. The 2 reds needed 25 vac and the 2 orange needed 120 vac. So I went to radioshack and picked up a 25 vac transformer. After wiring everything up I get a Single Horizontal Line on the monitor.

(http://i.imgur.com/dwa2iu8.jpg)

Title: Re: WG 25K8112 Single Horizontal line
Post by: FullmetalHeart on July 09, 2014, 09:42:29 am

Pulled the board out

(http://i.imgur.com/sEO6GzN.jpg)
(http://i.imgur.com/IYr0JxJ.jpg)
(http://i.imgur.com/GI3KwSF.jpg)