The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: bimm25e on December 29, 2013, 11:50:53 am

Title: 15Khz through GBS-8100
Post by: bimm25e on December 29, 2013, 11:50:53 am

I just got my GBS-8100 and I'm having trouble getting the frequency to match on my K-7000 chassis

The cabinet has a CAPCOM I/O and I'm routing the video signal to its VGA port so I'm using the VGA-OUT on the GBS-8100, IM not seeing any information on switching the device to 15Khz only output-- I thought this was supposed to be a video converter but it seems to be just passing through the VGA signal

Title: Re: 15Khz through GBS-8100
Post by: bimm25e on December 29, 2013, 02:12:16 pm

answered  my own question - the VGA out is simply a passthrough, by making a female VGA lead using pins 1,2,3,5,13,14 (r,g,b,Gnd,Sync-bridged)I was able to use the VGA lead with the 15Khz RGB standard going through it.


anyone know how to make these things save settings after they lose power?  It would really suck if I had to recalibrate it every time I reboot the PC (which is supplying the +5VDC to the unit)