The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: trixunlimited on November 18, 2013, 12:18:15 pm
-
I just recently purchased a Dance Dance Revolution Korean cabinet and the monitor had been replaced with this Thomson Monitor.
Tube # A68ELM02X021
Serial # D-GAM40206
I want to put Open ITG in the Machine (an open based version of DDR that runs on a pc) but I wanted to know what resolutions this monitor can handle and whatnot.
Attached are pictures of said monitor, any help is welcomed
-
looks like a wells gardner d9400 from what i can see-some better photos of the chassis would help more
if it is a d9400 then it runs cga to svga
-
looks like a wells gardner d9400 from what i can see-some better photos of the chassis would help more
if it is a d9400 then it runs cga to svga
Thank you for getting back to me so quickly, I will take some more pictures when I get home from work of the board/chassis.
I really am appreciative of the help.
-
looks like a wells gardner d9400 from what i can see-some better photos of the chassis would help more
if it is a d9400 then it runs cga to svga
So after zooming in on the picture and comparing boards, you are 100% correct it is a d9400 Grantspain I really appreciate the help
for any other people who need it
http://www.wellsgardner.com/pdf/Spec/D9400_SPEC.pdf (http://www.wellsgardner.com/pdf/Spec/D9400_SPEC.pdf)