The NEW Build Your Own Arcade Controls

Main => Woodworking => Topic started by: darkSSide on May 01, 2013, 02:38:29 pm

Title: 3" Happs trackball mount template?
Post by: darkSSide on May 01, 2013, 02:38:29 pm

Does anybody have this template that prints out the correct size?

Sent from my Atari 2600

Title: Re: 3" Happs trackball mount template?
Post by: sandheaver on May 01, 2013, 02:48:29 pm

If you have the template in PDF format, you can print it in real size by selecting the radio button that says "actual size" instead of "stretch/shrink to fit" or whatever the verbage is.

If the PDF was created properly, and your printer isn't a doofus, that'll print out a properly sized template.

If it's not PDF I can't help.  It will depend on the program doing the printing and your printer driver.

Title: Re: 3" Happs trackball mount template?
Post by: darkSSide on May 01, 2013, 03:50:46 pm

The one I have is a jpeg from an old thread some one posted on here. Where can I get the PDF?

Sent from my Atari 2600

Title: Re: 3" Happs trackball mount template?
Post by: sandheaver on May 01, 2013, 04:15:20 pm

http://arcadeartlibrary.com/arcade_art/details.php?image_id=217 (http://arcadeartlibrary.com/arcade_art/details.php?image_id=217)

that site has the .ai file (Adobe Illustrator) but you can open it (I think) with Inkscape, a free (and good) vector drawing tool.  http://www.inkscape.org/ (http://www.inkscape.org/)

Title: Re: 3" Happs trackball mount template?
Post by: JDFan on May 01, 2013, 06:48:18 pm

Here is a converted copy of the above converted to .pdf and exported from ADOBE illustrator in case you can't open the .ai file - ( https://dl-web.dropbox.com/get/jarr_ds_artwork%20%5BConverted%5D.pdf?w=AACnyOx1qLVddLPU7hcCrop263f9UN2S-aEFJhMfoYEfqg ))

Title: Re: 3" Happs trackball mount template?
Post by: darkSSide on May 01, 2013, 07:37:50 pm

Quote from: JDFan on May 01, 2013, 06:48:18 pm

Here is a converted copy of the above converted to .pdf and exported from ADOBE illustrator in case you can't open the .ai file - ( https://dl-web.dropbox.com/get/jarr_ds_artwork%20%5BConverted%5D.pdf?w=AACnyOx1qLVddLPU7hcCrop263f9UN2S-aEFJhMfoYEfqg ))

Link doesn't work :-\

Title: Re: 3" Happs trackball mount template?
Post by: JDFan on May 01, 2013, 11:16:03 pm

Quote from: darkSSide on May 01, 2013, 07:37:50 pm

Quote from: JDFan on May 01, 2013, 06:48:18 pm

Here is a converted copy of the above converted to .pdf and exported from ADOBE illustrator in case you can't open the .ai file - ( https://dl-web.dropbox.com/get/jarr_ds_artwork%20%5BConverted%5D.pdf?w=AACnyOx1qLVddLPU7hcCrop263f9UN2S-aEFJhMfoYEfqg (https://dl-web.dropbox.com/get/jarr_ds_artwork%20%5BConverted%5D.pdf?w=AACnyOx1qLVddLPU7hcCrop263f9UN2S-aEFJhMfoYEfqg) ))

Link doesn't work :-\

Hmm -- It's working here, Might be a link that only works from my account but this new one should work ! --  ( https://www.dropbox.com/s/4i9oohwgy1xdx7m/jarr_ds_artwork%20%5BConverted%5D.pdf (https://www.dropbox.com/s/4i9oohwgy1xdx7m/jarr_ds_artwork%20%5BConverted%5D.pdf) )

Title: Re: 3" Happs trackball mount template?
Post by: darkSSide on May 02, 2013, 12:30:02 am

Thanx!