The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: mebronx2000 on December 29, 2012, 05:59:30 pm

Title: help with hooking up a donkey kong jr monitor to a 60 in 1 board
Post by: mebronx2000 on December 29, 2012, 05:59:30 pm

i have a donkey kong jr cab that i want to convert to a 60 in 1 ... i want to use the monitor that is in the cab but i dont know where on the board to hook it up can anyone help please ? here are some pics
this is how the monitor looks <br>
(http://i1124.photobucket.com/albums/l563/mebronx2000/IMG_0020_zps5f310280.jpg)<br>
this is the connector that is from the monitor <br>
(http://i1124.photobucket.com/albums/l563/mebronx2000/IMG_0021_zpsf6b4bfb2.jpg)<br>
(http://i1124.photobucket.com/albums/l563/mebronx2000/IMG_0022_zps5c348a38.jpg)<br>
(http://i1124.photobucket.com/albums/l563/mebronx2000/IMG_0023_zps827b6d40.jpg)<br>
here is the 60 in 1 board <br>
(http://i1124.photobucket.com/albums/l563/mebronx2000/IMG_0024_zps877d7b11.jpg)

Title: Re: help with hooking up a donkey kong jr monitor to a 60 in 1 board
Post by: BobA on January 03, 2013, 11:48:01 pm

The 60 in 1 board outputs the video via the jamma connector.

N- Green        12- Red
P- Vert Sync    13- Blue
                      14- Video Ground

These would have to be matched up to the plug on your monitor.

Title: Re: help with hooking up a donkey kong jr monitor to a 60 in 1 board
Post by: mebronx2000 on January 04, 2013, 05:56:41 am

 :cheers: thanks for the reply !  :notworthy: