Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: rpucci on September 17, 2012, 06:42:19 pm

Title: WRD 200 Interface
Post by: rpucci on September 17, 2012, 06:42:19 pm

Hi

I don't know if this topic belongs here,but does anyone have a interface # 2-66965-01 for sale or know where I can get one.I have a WRD wallbox and want to connect it to my Rowe R-86 jukebox.thanks

Bob

Title: Re: WRD 200 Interface
Post by: ami-man on September 19, 2012, 10:48:19 am

Hello Bob,

I have hooked up an interface with a wall box that is set up to connect to connect as a R-80S to R-83 using a 4-06372-03 interface and this works fine, selects A side and B side selections.

When you posted your original message regarding did you say that the serial led was not lit? also did you have the loom in the interface at connection P601 that connects into the R-86 CCC in P-103?

Also what connections are you using on TB601 on the on the interface. You only need to connect to clock & Data and you must connect a 28 Volts AC connection and ground direct to the wallbox, do not expect to get 28volts at the marked connections at TB601.

If you require any further information please contact me off of line.

Regards
Alan

Alan Hood
ami-man
UK
alan-hood@datex.co.uk

Title: Re: WRD 200 Interface
Post by: rpucci on September 19, 2012, 01:18:59 pm

Hi Alan

Thanks for your help.All I have is a wallbox and I didn't try to hook it up.

I thought you need a interface in the jukebox and have to run a 9 conductor cable to the wallbox.I have the manual and it says I need interface # 2-66965-01.

What kind of pictures of the wallbox you want.The outside and the inside.

Bob

Title: Re: WRD 200 Interface
Post by: ami-man on September 20, 2012, 04:44:22 am

Hello Bob,

If you can send the pictures of the connections in the wallbox and the marking/legend of the connections, you could show the connections on the wallbox manual.

Regards
Alan

Alan Hood
ami-man
UK

Title: Re: WRD 200 Interface
Post by: rpucci on September 21, 2012, 09:38:16 am

Hi Alan

Did you get my pictures.I send by email.

Bob

Title: Re: WRD 200 Interface
Post by: ami-man on September 21, 2012, 10:15:02 am

Hello Bob,

Sorry no and I have checked through the spam folder. Did you send to alan-hood@datex.co.uk

Regards
Alan

Alan Hood
ami-man
UK

Title: Re: WRD 200 Interface
Post by: rpucci on September 21, 2012, 12:34:09 pm

Hi Alan

Yes I did.Isent them to alan-hood@datex.co.uk
On your email to me,all I did was to hit the reply button

Bob

Title: Re: WRD 200 Interface
Post by: rpucci on September 22, 2012, 09:54:02 am

Hi Alan

I did try again and sent more pictures yesterday.Hope you received them.

Bob

Title: Re: WRD 200 Interface
Post by: ami-man on September 24, 2012, 05:13:34 am

Hi Bob,

As you know I saw the pictures when you posted them to Phonoland.

I will get the prices for you to send an interface to you.

Regards
Alan

Alan Hood
ami-man
UK

Title: Re: WRD 200 Interface
Post by: ami-man on September 25, 2012, 05:32:42 am

Hello Bob,

The interface was posted yesterday can you please let me know when it arrives.

Regards
Alan

Alan Hood
ami-man
UK

Title: Re: WRD 200 Interface
Post by: rpucci on September 25, 2012, 06:00:25 am

Hi Alan

Thanks I sure will.

Bob

Title: Re: WRD 200 Interface
Post by: rpucci on October 02, 2012, 01:17:11 pm

Hi Alan

I replied private message on the other forum.

Bob

Title: Re: WRD 200 Interface
Post by: fred_fender on December 01, 2016, 11:40:56 pm

Hi from an Newbe.
I own a WRD200 Wallbox and need an Manual and Informations what Signals comes and goes in and out.
I planned to build in an 10 icnch Touchscreen with an little Computer there.
sunny greats this Time up to 15. December from Florida. Then back to Germany
Fred
mail to:
fred_fender11@yahoo.co.uk
thanks