The NEW Build Your Own Arcade Controls

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Azure on September 03, 2012, 09:38:44 am

Title: (Re)building my supergun, need help with parts
Post by: Azure on September 03, 2012, 09:38:44 am

My supergun's been in service since 2002/3, and it's time for a rebuild. I've gathered most of what I need, but I am having problems locating potentiometers for RGB level adjustment. It wasn't a problem before (as the unit was exposed for on the fly tinkering, and the RGB-NTSC convert's pots did the job), but I'm going to be using a enclosure this time around, and I need pots I can remote mount to the side of the case. My local electronic supplier doesn't carry them in the 500-ohm range... any suggestions?

Title: Re: (Re)building my supergun, need help with parts
Post by: Nephasth on September 03, 2012, 12:02:26 pm

$0.99 shipped. (http://www.ebay.com/itm/500-Ohm-B500-Taper-Potentiometer-Pot-17mm-Shaft-/400275310285?pt=LH_DefaultDomain_0&hash=item5d324486cd)

Title: Re: (Re)building my supergun, need help with parts
Post by: Azure on September 05, 2012, 06:13:55 am

Nephasth, you have my thanks:)