The NEW Build Your Own Arcade Controls

Main => Artwork => Topic started by: chronopete on July 15, 2012, 12:59:57 am

Title: I need help with the button outline for the CP
Post by: chronopete on July 15, 2012, 12:59:57 am

Hello,

I tried to design something good for the button outline for the CP, but anything I tried looked lame thus far, I'm getting frustrated.  I was wondering if anyone here could help me come up with something creative?  Here is what I have so far:
(http://www.imgxc.com/fullimage/gEKJvl.jpg)

Here is the button layout:
(http://www.imgxc.com/fullimage/fkRw36.jpg)

Here is the link to my cabinet build and side graphics and marquee:
http://forum.arcadecontrols.com/index.php?topic=121148.0 (http://forum.arcadecontrols.com/index.php?topic=121148.0)

Both joysticks are black, all buttons are black except for the 4 buttons in the upper row, they are white.

Any help would be much appreciated.

Title: Re: I need help with the button outline for the CP
Post by: chronopete on July 22, 2012, 10:21:23 am

Since nobody replied, I will just go with the picture as is, and use black buttons.