The NEW Build Your Own Arcade Controls
Main => Software Forum => Topic started by: beast8812 on June 13, 2012, 02:51:08 pm
-
I am using hyperspin as my FE and I am using 4 wireless xbox 360 controllers. I tried setting up all my controllers thru the emulators but the issue is if you dont start the emulator with all 4 controllers powered on it defaults to the original controls in most emulators, and then I have to reprogram everything all over again. So my plan is to use xpadder. Now here are where my questions begin. I have about 15 emu's I want to setup multiple controllers for. Do I need to make a profile for each controller for each emu? Is there any easy way where I don't have to make 40 different xpadder profiles? Also I want to be able to switch in and out of emulators thru hyperspin and have the xpadder profile load for each controller each time I switch into a new emulator. So I guess it would have to close the xpadder profile once I exit a emu and head back into hyperspin. Is there an easy way to do this? This is all pretty new to me and I screw up a bunch of stuff almost anytime I try change anything, so the easier it is, or the more detailed the explanation the better. Thanks for any help.
-
I too am using xpadder and HS (HS doesn't play nice with my U360s) and here's how I have it set up. I made an xpadder profile with the HS default keyboard settings and set it to activate when HS is active. Then I made a blank profile and set it as the default. That way when you open anything that's NOT HS, (emulator), it just sees the controller as a gamepad. Then, I set each emulator's input settings with the gamepads. As long as the emulator supports gamepads and saves your input configs, you're golden. Some have issues, like I know AAE doesn't support gamepad inputs, so I made a xpadder profile for that. Also, if you need help with any of that, or want to set different configs for individual games, feel free to hit me on PM.
:cheers: