The NEW Build Your Own Arcade Controls

Main => Software Forum => Topic started by: LASmith132 on May 29, 2012, 10:16:18 am

Title: Hyperspin intro video
Post by: LASmith132 on May 29, 2012, 10:16:18 am
Hey Guys,

I was wondering if anyone could design and make a Tron-legacyish (new word) Intro Video for Hyperspin instead of their default one? I have seen other viewer submitted content and they are really good but I was looking for something more specific.

If you could help me out or have any ideas that would be great! if not no big deal, thanks guys!
Title: Re: Hyperspin intro video
Post by: GregD on May 29, 2012, 02:47:38 pm
Just wondering where you have seen other high quality videos for Hyperspin.  I have been wanting to try something different.  I have seen some decent stuff on youtube but the quality is not high enough to rip it.
Title: Re: Hyperspin intro video
Post by: LASmith132 on May 29, 2012, 02:52:01 pm
the only vids I have seen have been on emumovies.com.
Title: Re: Hyperspin intro video
Post by: capsule on May 29, 2012, 05:18:17 pm
What about this "home made" Derezzed music video? DAFT PUNK'S DEREZZED / TRON on Vimeo (http://vimeo.com/20580968)

It would make a great intro for a Tron Legacy cab!
Title: Re: Hyperspin intro video
Post by: LASmith132 on May 29, 2012, 09:23:54 pm
Awesome video, I think if there was a way to shorten the video it would be perfect!

Thanks!
Title: Re: Hyperspin intro video
Post by: Drnick on May 30, 2012, 03:27:58 pm
Here you go.  I used the most basic tools possible for this one.  Windows Movie Maker and Audacity.  By the way I notice you have a separate post you bumped after just 1 day.  As someone once sang "Just have a little Patience".

Homage to Tron short.wmv (http://www.youtube.com/watch?v=W4h8lj-wHlk#)


Grrr, Had to use full youtube.com address not youtu.be  :banghead: :banghead: :banghead:
Title: Re: Hyperspin intro video
Post by: LASmith132 on May 31, 2012, 01:28:56 pm
Sounds good about having patience, my bad  :-\

also thank you for your help it looks awesome!!!!
Title: Re: Hyperspin intro video
Post by: LASmith132 on May 31, 2012, 04:21:07 pm
Anyone else wanna give it a shot with some custom work?
Title: Re: Hyperspin intro video
Post by: LASmith132 on May 31, 2012, 11:12:07 pm
Here you go.  I used the most basic tools possible for this one.  Windows Movie Maker and Audacity.  By the way I notice you have a separate post you bumped after just 1 day.  As someone once sang "Just have a little Patience".

Homage to Tron short.wmv (http://www.youtube.com/watch?v=W4h8lj-wHlk#)


Grrr, Had to use full youtube.com address not youtu.be  :banghead: :banghead: :banghead:

so the video doesnt work anymore?.........what should I do to see it?
Title: Re: Hyperspin intro video
Post by: Drnick on June 01, 2012, 02:55:59 am
It's working for me, what does youtube say when you access it.  I suppose they may have blocked it in certain countries  :angry:
I Bet its because it has Daft Punk in it :hissy:

Try the following link

http://img684.imageshack.us/img684/3347/9g9a.mp4 (http://img684.imageshack.us/img684/3347/9g9a.mp4)
Title: Re: Hyperspin intro video
Post by: headkaze on June 01, 2012, 03:12:32 am
It says "This video contains content from UMG, who has blocked it in your country on copyright grounds."
Title: Re: Hyperspin intro video
Post by: Drnick on June 01, 2012, 08:01:11 am
Yeah that will be because of the music file I used.  :angry: :angry: :angry: :angry: :angry: :angry:

If all else fails here is a seriously compressed down version.

I also changed the Music from Daft Punks "The Grid" to some random electronic tunage so you should be able to see the youtube version now.
Title: Re: Hyperspin intro video
Post by: LASmith132 on June 01, 2012, 11:13:41 am
I will check out the link(s) when I get home guys thanks for all the help! :notworthy:

keep them designs and re-mixes coming if you feel so inclined (which would be awesome ) BUT if not you guys are always more than helpful thanks tons guys !  :notworthy:
Title: Re: Hyperspin intro video
Post by: Drnick on June 01, 2012, 12:43:59 pm
Personally I would go for the first 40 Seconds of this one  :applaud:

Official Tron Legacy Intro (http://www.youtube.com/watch?v=V70QMpoRmhc#)
Title: Re: Hyperspin intro video
Post by: LASmith132 on June 01, 2012, 11:13:42 pm
Here you go.  I used the most basic tools possible for this one.  Windows Movie Maker and Audacity.  By the way I notice you have a separate post you bumped after just 1 day.  As someone once sang "Just have a little Patience".

Homage to Tron short.wmv (http://www.youtube.com/watch?v=W4h8lj-wHlk#)


Grrr, Had to use full youtube.com address not youtu.be  :banghead: :banghead: :banghead:

Could you send me the original video with original music that you redid?
Title: Re: Hyperspin intro video
Post by: Drnick on June 02, 2012, 02:57:34 am
No problem, I will sort out a dropbox account or summit and drop you the link.

125MB AVI File (HD Res)
http://www.fileden.com/files/2012/6/2/3311449/final%20edit.rar (http://www.fileden.com/files/2012/6/2/3311449/final%20edit.rar)

7MB WMV Version (640x480)
http://www.fileden.com/files/2012/6/2/3311449/final%20edit%20smaller.wmv (http://www.fileden.com/files/2012/6/2/3311449/final%20edit%20smaller.wmv)
Title: Re: Hyperspin intro video
Post by: mike boss on June 12, 2012, 06:34:51 am
Cool thread.
Drnick good work.

Touching on what someone asked earlier in the thread, does anyone know of any good intro videos ?
Not even Hyperspin specific, but general arcade, or MAME ?
I've seen some on youtube, but not that good.

Seems like good intro videos dont have the support other things do, lack of interest ?

I know myself I do custom MaLa menus and make many available for download (as well as private jobs).
I wish I could do videos, heck, I'd love something inspired by the Mario Bros arcade game.
(Thats my latest project)