Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: DCsegaDH on April 19, 2012, 04:20:26 pm
-
I modded this arcade stick from an old Xbox arcade stick I had just sitting around, so I decided I should mod it with arcade parts. I will be using 6 buttons not 8. It was a fun project and it was easy to do. I didn't take any pictures of me putting on the artwork, I was 2 or 3 in the morning, so I wasn't in the mood at the time.
parts:
case: Xbox 1 Hori Fighting Stick EX
Joystick: Sanwa JLF
Buttons: Sanwa 30mm and 1 Sanwa 24mm start button
Ball top: Seimitsui "bubbletop"
PCB: ZD Rematch Encoder (Mame or PS3)
Artwork: Custom artwork designed by me, printed from Gameongraphix. I used Photoshop CS3.
(http://img42.imageshack.us/img42/4185/xboxarcademoddedstick00.png)
(http://img39.imageshack.us/img39/4185/xboxarcademoddedstick00.png)
(http://img825.imageshack.us/img825/4185/xboxarcademoddedstick00.png)
(http://img99.imageshack.us/img99/4185/xboxarcademoddedstick00.png)
(http://img37.imageshack.us/img37/4185/xboxarcademoddedstick00.png)
(http://img205.imageshack.us/img205/4263/part7s.png)
-
More pictures:
(http://img11.imageshack.us/img11/44/part8v.png)
(http://img844.imageshack.us/img844/3836/part9r.png)
(http://img7.imageshack.us/img7/6171/part10h.png)
(http://img835.imageshack.us/img835/1174/part11m.png)
(http://img829.imageshack.us/img829/5827/part12k.png)
(http://img515.imageshack.us/img515/5871/part13w.png)
(http://img221.imageshack.us/img221/4981/part14d.png)
here a video of it My Wolverine/Punisher arcade stick (http://www.youtube.com/watch?v=oqLv6UgDpKs#ws)
-
Why ruin it with an octagonal gate? fighters should stick with a square gate not a scrubby octo
/SRK board trolling
::) j/k it looks great and you can tell you put a lot of thought into the details. Nice work
-
In the pictures it shows the octagonal gate, but I think I put the square gate back on it. Thanks ;D I'm not that picky when it comes to arcade controls, to me its more about the games.