The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: Yenome on April 17, 2012, 06:27:57 am
-
So i got my xin mo board in and started getting everything all set to get hooked back up. turned on the pc and everything kicked up but the tv wasnt showing anything a look in the back showed the neckboard sitting on the back of the back panel. it didnt look like any pins had broken off just that the board had fallen off some how. can i just put the board back in its place or do i need ot get a new tv. i heard bout people replacing tv board with arcade ones and making the tv an arcade monitor tho i dont know how much is involved in that.
-
It should just fit right back on no problem. Its just pressure fit, so just line up the pins correctly and push it on. Make sure its unplugged first!
-
Make sure its unplugged first!
ZAAAAAAAPPPPPP!!!!!!
-
I think my cat knocked it off. plus jim the tv has been in the cab for weeks now working just fine. my dam cat got on top of the thing and i believe climbed in the marque area since i had the marque off from mounting the speakers. then he gets to the bottom and comes out the coin door as i dont have locks in them. But i did put the board back on after making sure it was discharged. hoping my remote come in tomorrow so i can adjust the image to remove overscan.
-
then he gets to the bottom and comes out the coin door as i dont have locks in them.
Haha! Hilarious! :)