Build Your Own Arcade Controls Forum

Arcade Collecting => Pinball => Topic started by: spag256 on April 10, 2012, 10:50:42 am

Title: Fish tales Pinball-Test switch
Post by: spag256 on April 10, 2012, 10:50:42 am

I purchased a used Fish tales pinball machine and all the wires to the 4 button test switch panel inside the coin door are disconnected. Can anyone show me where to solder each wire?

Title: Re: Fish tales Pinball-Test switch
Post by: Generic Eric on April 10, 2012, 01:04:47 pm

I can't help you exactly with that, but I think you will want a manual if you plan to keep the machine.  They can be had on   ebay. (http://www.ebay.com/itm/Fish-Tales-Pinball-Operations-Service-Repair-Manual-Arcade-Game-Machine-Tails-/270921282745?pt=LH_DefaultDomain_0&hash=item3f142ab4b9)

Title: Re: Fish tales Pinball-Test switch
Post by: Dawgz Rule on April 10, 2012, 06:31:30 pm

Here is a link to the internet pinball database page for Fish Tales.  You can download an electronic version of the manual. 

http://www.ipdb.org/search.pl?any=fish+tales&searchtype=quick#861 (http://www.ipdb.org/search.pl?any=fish+tales&searchtype=quick#861)

The pinout is as follows:

Esc: Orange-Green
Volume Down: Orange-Blue
Volume Up:  Orange-Violet
Enter:  Orange-Gray

Title: Re: Fish tales Pinball-Test switch
Post by: spag256 on April 11, 2012, 10:56:06 am

Thanks for the help.