The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: sparkulator on September 23, 2003, 05:29:35 am

Title: Nanao 05A00362G1 monitor smoking.
Post by: sparkulator on September 23, 2003, 05:29:35 am

Hi.
I have a Nanao 05A00362G1 dual res monitor 27".
B+ was too high because main reg transistor was shorted,replaced that but still a problem with Q408 smoking.
Any help would be great.

Title: Re:Nanao 05A00362G1 monitor smoking.
Post by: tom61 on September 23, 2003, 04:36:09 pm

Sounds like a really serious problem. See if you can find a schematic for it, and take it to a TV repair shop.

BTW, what is 'B+'?

Title: Re:Nanao 05A00362G1 monitor smoking.
Post by: sparkulator on September 23, 2003, 08:40:12 pm

Thanks tom61.
I have already looked for schematic with no luck.
I'am an electronics tec and I repair alot of monitors for alot of businesses around my area,I come from the TV repair industry but the problem I have is that there is a couple of components that have died and there is no markings on them to identify the part No's.
The B+ is the main DC voltage rail that powers the chassis. It is a regulated voltage rail that is kept at a constant DC voltage eg 90v regardless of AC input voltage eg 100v to 130v.
what is BTW?.
THANKS.

Title: Re:Nanao 05A00362G1 monitor smoking.
Post by: mpm32 on September 23, 2003, 09:04:11 pm

By The Way