Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: playedataritoday on December 04, 2011, 09:12:10 pm

Title: Building a Coin Pusher
Post by: playedataritoday on December 04, 2011, 09:12:10 pm

I found a few older threads discussing people building their own coin/quarter/token pushers.  I haven't been able to find one cheap/reasonably priced in my area (NJ), so I am considering building one.  Anyone have a link to a really cool design?  I've seen a few on Instructables, which were simple and not quite finished.    Links or thoughts/suggestions would be appreciated.  I'm thinking 2 levels and three drop slots.  Haven't decided on full size upright or a counter top model yet.

Title: Re: Building a Coin Pusher
Post by: Q*Bert_OP on December 04, 2011, 11:59:04 pm

I have 2 "slim" pushers I'd consider selling. They are about 2' wide by 1.5' deep, single coin slot with motorized coin chute controlled by button.

Both would fit on a standard size pallet for shipping. They are in TX

PM if interested

Title: Re: Building a Coin Pusher
Post by: playedataritoday on December 06, 2011, 08:48:41 pm

Quote from: Q*Bert_OP on December 04, 2011, 11:59:04 pm

I have 2 "slim" pushers I'd consider selling. They are about 2' wide by 1.5' deep, single coin slot with motorized coin chute controlled by button.

Both would fit on a standard size pallet for shipping. They are in TX

PM if interested

PM sent.  I fear shipping will kill this, but let me know what you have.  Ideally I want something in the NY/NJ/CT/PA/DE area that I can pickup in person.

More to the point of the post, I am still seriously considering building one.  Has anyone done it recently? Some of the links I found were older, so I'm looking for some advice.