The NEW Build Your Own Arcade Controls

Arcade Collecting => Pinball => Topic started by: Ronmar on May 22, 2011, 09:02:16 am

Title: Williams Toledo Electro Mech Pinball 2 player - Problem
Post by: Ronmar on May 22, 2011, 09:02:16 am

I have a Williams Toledo Pinball which works great in the 1 player mode. However there is a problem in the 2 player mode and I hope that some one can give me an idea where to go from here. I have the owner's manual and the schematic. I am ex electronics tech so I can get around it but this is driving me crazy.

Problem:
In 1 player play, 3 ball & 5 ball, the games works great.
In 2 player 3 ball, Player 1 & player 2 , ball 1 scoring goes to player 1. ball 2 & 3 score to each player properly.
In 2 player 5 ball, Player 1 & Playr 2 , ball 1 & 2 scoring go to player 1 and ball 3,4,5 score to each player properly.

where do I go from here? Everything is tight and seems to working normal apart from this.

Thanks

Ron

Title: Re: Williams Toledo Electro Mech Pinball 2 player - Problem
Post by: pbgarage on May 23, 2011, 08:45:41 pm

 Start by cleaning the player unit.  Make sure it will 'ratchet' cleanly.

 Some very light instrument oil is needed to lube the unit and the
contacts.

    http://www.grainger.com/Grainger/STARRETT-Tool-and-Instrument-Oil-2ZVL1 (http://www.grainger.com/Grainger/STARRETT-Tool-and-Instrument-Oil-2ZVL1)



Fred
TX
CARGPB#8
=====================

Title: Re: Williams Toledo Electro Mech Pinball 2 player - Problem
Post by: Ronmar on May 25, 2011, 05:31:12 pm

Thanks Fred I will let you know

Ron