The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: akastaff on February 22, 2010, 06:19:04 am

Title: Polo 2/25 Wont sync 24kz
Post by: akastaff on February 22, 2010, 06:19:04 am

Got a Sega Rally which is medium res but when I use a this Polo 2/25 I have it is way out of sync and I presume it is only running in 15kz, I thought the Polo 2/25 chassis auto switched..

Can see picture no problem but the scan rate is all wrong..

Any help, surgestions welcomed.

Thx

Title: Re: Polo 2/25 Wont sync 24kz
Post by: grantspain on February 22, 2010, 01:23:09 pm

some polo 2 are manual switch using a jumper plug near the psu cage

Title: Re: Polo 2/25 Wont sync 24kz
Post by: akastaff on February 23, 2010, 09:29:29 am

Cannot see anything on it, the labeling does not mention Auto or anything to indicate dual res which makes me think it is 15kz only but didnt know the POLO 2 range had only 15kz.

Title: Re: Polo 2/25 Wont sync 24kz
Post by: grantspain on February 23, 2010, 01:08:17 pm

if its an auto switching chassis then there is an extra board standing vertical in the psu cage-if its manual switching there is a 4 pin jumper plug(green)'
i am not aware of any polo 2 15khz only