
NOTE: It uses RandyT's OCX to talk to the Led-Wiz.
Make Sure you install that first.

It uses the same engine that drives the attract mode MaLa Led-Wiz Plugin. 


This player plays LWA (LedWiz Animation files).

This format was developed by RandyT from GGG
Unfortunately this does not address multiple Wiz devices

That is why this player was produced as it can play LWA files that send commands  
to either:
1) All Detected Led-Wiz .. or
2) A Specific Led-Wiz by addressing it directly by it's ID#

The only extra command this player recognizes is "LWZ-NUM:<Device Number>"

When the LWZ-NUM command is encountered, the software skips the pause (set by the LWZ-DUR and immediately sends the next command to the device number specified.  It will then treat that device as the current device until another LWZ-NUM command is encountered

USAGE:
eg:
"LWZ-NUM:2"
Commands following this line will be sent just to Led-Wiz ID#2

"LWZ-NUM:1"
Commands following this line will be sent just to Led-Wiz ID#1

"LWZ-NUM:0"
Commands following this line will be sent to all detected Led-Wiz

Note:
If no LWZ-NUM commands are given (like in the other old examples included) then the commands sent to all detected Led-Wiz.
Enjoy...

Loadman
 

