Main > Main Forum

can I wire one pushbutton to do mutliple things?

<< < (3/3)

painterinfo:
I strongly recommend against mucking with mains voltage unless you are qualified.

If you want the same button to power on your computer as well as do something else I posted a safe method with a relay here
http://forum.arcadecontrols.com/index.php?topic=98894.msg1053504#msg1053504
A couple posts down is a full description

If you want to do as you say, activate some mains powered device and also send a button press to an IPAC here is a circuit that will do that.

For the info of people that are qualified to work with mains voltage

Do something wrong here and you will fry something.

gazz292:
i would personaly use 2 relays, i never like to mix voltages in relays, especialy when a computer type devise is involved with signal level switching, 

painterinfo:

--- Quote from: gazz292 on January 30, 2010, 04:59:29 pm ---i would personaly use 2 relays, i never like to mix voltages in relays, especialy when a computer type devise is involved with signal level switching, 

--- End quote ---

good point

Navigation

[0] Message Index

[*] Previous page

Go to full version