Main > Main Forum
Anyone Try the Aim Track module with this gun ?
bkenobi:
He posted a thread about it. I'm sure he'll post the link again for you.
Drakin:
Yea I did the build and posted on Hyperspin-fe....here is the link:http://www.hyperspin-fe.com/forum/showthread.php?t=4797
RandyT:
Here's something you might want to think about doing....
The trigger switches in these guns aren't great. Just one of those little square tactile button switches that wear out pretty quickly.
Mine had a nearly dead one in it, and I didn't want to just replace it with the same weak part, so....
It's not the prettiest, but it's not going anywhere any time soon. You have to clip the terminals down nearly to the switch body and solder the wires to the common and NC terminals. You then position the switch in such a way as to have it depress the button when at rest. You need to clip away a little bit of the plastic, but not much.
Flood it with some high temp hot melt and hold it until it cools. It helps to test the action while it's cooling to make sure it hasn't moved out of position. Besides giving you a much more reliable trigger switch, this mod also moves the trigger action to the top of the throw, instead of the bottom where it normally would be. It becomes a hair trigger that makes rapid fire a piece of cake, and much less stressful on your finger than the old arrangement.
FWIW.
RandyT
Drakin:
Nice!!! Mod I'll definatly have to remember this.
Encryptor:
--- Quote from: Drakin on November 02, 2009, 04:19:19 pm ---Yea I did the build and posted on Hyperspin-fe....here is the link:http://www.hyperspin-fe.com/forum/showthread.php?t=4797
--- End quote ---
I've been trying since this was posted to get into it and just keep getting a database error. Did you have fairly detailed pics on it? I know I looked at it when it was posted in the other thread but I don't recall any being that detailed.
Encryptor
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version