| Main > Monitor/Video Forum |
| Purchasing Arcade monitors. |
| << < (3/20) > >> |
| NoBullMAME:
--- Quote from: Level42 on October 15, 2009, 06:21:14 pm ---If you mean CRT arcade monitors, you should delete Happ. They only have LCD ---steaming pile of meadow muffin--- now. And add www.arcadeshop.com as they carry brand new Vision Pro 19" CRT monitors ! --- End quote --- Happs still sells some CRT monitors The 29/27 High-res Makvision is my favorite, but they also have them in 24-25 inch as well. There's no more WG 19 inch, but if you want a 19-inch just use a PC monitor. The 19" WG (31khz) was almost as clear as a PC monitor anyway. |
| Brian B:
What do you do when you want a multi-sync? That Mak is switchable only, correct? B. |
| Gray_Area:
--- Quote from: Brian B on January 31, 2011, 08:07:34 pm ---What do you do when you want a multi-sync? That Mak is switchable only, correct? B. --- End quote --- If it syncs to more than one scanrate, it is a multisync. The Makvision monitor will not sync to 15khz. |
| Brian B:
Yes. I have confirmed the Mak is a multisync. (A nice email exchange with Andre Mak.) According to the Happ website: http://www.happ.com/monitors/49271500.htm it will do 15kHz. Brian PS I have sent an email to Niemen to see if they are still producing CRTs as this is the only other company I have seen besides the Makvision. PSS I am told that Betson Distributing is another source for the Makvision Monitors. |
| Gray_Area:
--- Quote from: Brian B on February 05, 2011, 07:43:53 pm ---Yes. I have confirmed the Mak is a multisync. (A nice email exchange with Andre Mak.) According to the Happ website: http://www.happ.com/monitors/49271500.htm it will do 15kHz. Brian --- End quote --- NoBullMAME said the hi-res Makvision. That one will not sync to 15khz. The tri-sync you found is most likely analog. That means it doesn't remember picture settings between resolutions. |
| Navigation |
| Message Index |
| Next page |
| Previous page |