Main > Main Forum

Plexi and stuff

<< < (2/2)

Donpatchi:
When you want to do a bottom mounting without the screws beeing vissible i suppose you need an S plate (see pic)?

This would certainly be alot more simple then what i intended to do but i remember reading that this is not as solid as a top mounting.

Well here is the link to what i am refering to http://www.slagcoin.com/joystick/mounting_layering.html

Neverending Project:
That is a nice, clean solution. You would just need to make sure the mounting screws are long enough to get a couple of threads buried in the wood, but short enough that they don't poke through.

Another solution (what I did) is to use T-nuts from the top. Drill a hole for the nut to fit through, and a larger hole just deep enough to recess the flange. Then fill the top with bondo or wood putty. The screws thread in from underneath.

Franco B:
I did a JLF top mounting guide [here] if it helps.

Navigation

[0] Message Index

[*] Previous page

Go to full version