Main > Main Forum
Easiest way to cut all holes in Plexiglass for CP?
numbnutz48:
What is the easiest way to cut all holes in Plexiglass for CP?
brock.sampson:
I clamped my plexi to the top of my cp. Then used a 3/4" forstner to make a pilot hole for each hole and finished it off with my router and a laminate trim bit .
shponglefan:
Pay someone else to do it. ;)
But what I did was clamp down the base on top of the plexi, then used a hole saw to cut through. It worked fine and 25 holes w/ no chips or cracks. Just make sure to go slow and careful.
smalltownguy:
Every few months, this subject comes up. Here's what I know:
(shamelessly posted from other threads)
--- Quote from: smalltownguy on July 15, 2009, 07:27:59 am ---If (when!) you do recut the lexan for the CP, here's the approach I'd take, to ensure you don't get movement -- pick holes in each corner, and do them first. Then, if possible, mount the piece to your control panel, and mount buttons to the 4 holes. The buttons will serve as anchors that will keep things aligned much tighter than any clamp could. Then you can cut the rest of your holes.
If you're looking for a solution for drilling in plexi/lexan that can be done with a hand drill, see my post from another thread:
--- Quote from: smalltownguy on March 21, 2009, 11:02:00 pm ---Find someone you know who has a forstner bit. They really do cut through plexi smoothly without melting the edges & causing all sorts of problems. If you can't borrow one, you should be able to get the bit for about $10-15.
--- End quote ---
Of course a drill press is the recommended option, to ensure straight holes.
I LOVE LOVE LOVE those mini racing wheels, mounted to a spinner. I gotta get me one of those -- perfect solution to my 'I wanna wheel but don't want it all the time' quandary. Plus, I should be able to integrate it by just adding a spinner, which shouldn't take up much real estate. :applaud:
--- End quote ---
severdhed:
there have been alot of threads on this subject...
http://forum.arcadecontrols.com/index.php?;topic=89334
i used a router to cut all of the holes in my plexi and it worked great
Navigation
[0] Message Index
[#] Next page
Go to full version