Main > Main Forum
Jamma cabinet how do i hook up stereo sound?
TrAb:
This is what im working with...
Kevin Mullins:
Sweet cabinet.
Looks like that amp is stereo capable..... what do the two smaller connectors on the right hand side go to ?
They look like they would be the left and right inputs.
Is that a red LED indicating power is on ?
Looks to require 12volts.
TrAb:
Yes the LED is indicating it is getting power, it has two wires running to the 12v spot on it. And yes the other side runs to the left and right speakers...
Kevin Mullins:
So the two little connectors go to the speakers ?
That would be the OUTPUTS then.
But labeled next to the bigger connector it says OUT_R and OUT_L. (?)
VR_R and VR_L being the volume control.
12v and Ground on the ends.
Where do the two OUT wires run from that bigger connector on the amp go?
Is there anything connected to the JAMMA harness right now?
Just trying to get a good visual on what you have going on in there.
TrAb:
Nothing is coming out from the two out posts. And no nothing is connected to the jamma harness...
Heres a little diagram of that larger connector
Ground - Black wire coming out
S Ground - Gray wire, same color as the ground at the speakers so that must be it for sure
VR-R - Same color as whats going to right side speakers
VR-L - Same color as whats going to left side speakers
OutR - Nothing
OutL - Nothing
12V - 12v's is connected coming from what looks like a computer psu...
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version