Main > Main Forum
moved my cab...now trackball doesn't work right
krazy_kenny1:
--- Quote from: bkenobi on August 28, 2009, 01:07:02 am ---Is it possible that something smashed down on the trackball and bent the roller? Seems like that would be one heck of an impact, but that's the only thing I can think of if you've already checked the wiring.
--- End quote ---
I know nothing hit it. The cab was laying on its back, wrapped in furniture pads with nothing on top of it. When unloading the truck, there was still nothing on top of it. I guess I'll have to bite the bullet and take the CP apart.
edit: hmmm...I'm wondering if laying it on its back explains why it's the Y axis that's messed up. I couldn't easily load it up-right since it has wheels on the bottom and would be more difficult to secure.
Bender:
I think you can take the trackball apart from the back so you don't have to remove the CPO or plexi (as long you have access to the underneath of the panel)
brock.sampson:
Assuming you used the standard mounting plate your should be able to remove that from underneath without disassembling the rest of your control panel.
krazy_kenny1:
--- Quote from: brock.sampson on August 28, 2009, 02:56:11 pm ---Assuming you used the standard mounting plate your should be able to remove that from underneath without disassembling the rest of your control panel.
--- End quote ---
Ya, I used the standard plate...it's been trouble-free so long I've forgotten many of the details of how it went together.
brock.sampson:
Should just be four screws on the bottom and it will pop right out.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version