Main > Main Forum
Dual arcade monitors, please help!!
discgolfer72:
i have used a combo of soft 15 k and quick res to output to a arcade monitor without blowing cash on an uneeded arcade vga card
it seems that you problem is from trying to use the arcade vga card drivers and the ati control center to enable mutiple displays id pawn off the arcadevga on someone and go pick up a cheapo nvidia graffix card with dual outputs
then use soft 15k and quick res
quick res will bybass windows limit in 800x600 and soft 15 k will allow your card to run at 15 hz
i have bolth files if you cant find them
the ati control center is a pos config app it sucks even when trying to configure mutiple pc displays so i can understand having trouble with 2 cga monitors
at the verry least setup your one working monitor then run quick res then install the second monitor this should allow you to use the windows utility to adjust your settings instead of the craptasitc ati catylist tools
MaximRecoil:
Are both ports on the AVGA 15 KHz? Last I knew, the lower port was 15 KHz while the upper port was for the higher PC resolutions. Maybe that has changed with newer cards.
tommyinajar:
--- Quote from: Kevin Mullins on August 24, 2009, 11:59:14 am ---
--- Quote from: GaryMcT on August 24, 2009, 11:32:08 am ---Try uninstalling the display driver, rebooting, and reinstalling the display driver.
--- End quote ---
Be sure to uninstall ANY other display drivers and install ONLY the ArcadeVGA drivers and software.
Also verify that you are not trying to run a resolution that one or the other monitors isn't truly capable of.
--- End quote ---
You might also try Driver Cleaner or ATI cleaner- to make sure you get ALL the incorrect drivers out.
I swear ATI drivers are the absolute worst.
Navigation
[0] Message Index
[*] Previous page
Go to full version