Arcade Collecting > Pinball

Treasure Cove Cleaning kit

(1/4) > >>

shredso:
Does anyone have any experience with the Treasure Cove cleaning kit.  I'm about to bite the bullet and buy the $80 kit, it looks pretty sweet.

ChadTower:

--- Quote from: pinballjim on August 10, 2009, 07:37:58 pm ---It's good.  You can piece together the same stuff yourself for less money, but their kit is fine.



--- End quote ---

+1 and I'll add "a lot less".

shredso:
Can you point me in the direction of where I could find the parts separately?  If you are talking $10-20 savings I may just buy the set, if it's much more I'll do some research.  Thanks.

pinballwizard79:
I used it, works well.....bought replacement sponges here: http://www.topoftheline.com/micfoampolpa.html

TC's polish is made up of retail bought mixes of rubbing compounds & etc but I chose not to cheap out & make my own because I am sure there was a little trial & error they learned...............also, you can do many machines with the kit they sell.

Do it.

Jeff AMN:
A month and a half ago I pulled this Jackbot off a route, where it had been since the day it was delivered to the local operator. It was probably the dirtiest machine I've ever owned, and I've pulled pre-DMD machines off route where they've been 20+ years.



Using the TC kit, I got it looking beautiful with that wet shine glass look. People who saw it before I cleaned it up could barely believe it was the same machine after I finished.

Navigation

[0] Message Index

[#] Next page