Main > Main Forum

Manufacturer's Part # for Happ mechanical 12 way Rotary switch ??

(1/1)

brandon:
Hi topic says it all.. I was just wondering if anybody would mind looking at there mechanical rotary and posting the manufacturer's Part # NOT the Happ part number.  I figure they could be had some place for less than the $10 Happ sells them for.

EwJ:
A few years back, Mark Oates put together a rotary switch for 49-way joys. review
He has a site up to order. 
You could try contacting him for parts/info?

bkenobi:
FWIW, I have contacted Mark in the past and he was VERY courteous.  He hooked me up with some parts for my rotary's for a very reasonable price.  I don't think he's still into the kit like he used to be, so you may be able to get some parts for a good price.  It's definitely worth sending him an email if nothing else!  Good luck finding what you need. 

brandon:
thanks guys.. I was just kinda hoping somebody with a mechanical rotary could give me the number off of theirs :)  I can't believe that this is some sort of specialty switch that's made just for Happ.. I was hoping to find them on Mouser or Digi-key.  Possibly even see if the same manufacture makes and 8-way to build a Frontline controller :)  I will drop Mark an email though

brandon:
Hey some part # for anyone interested.. two for 12-way switches and one for an 8 way.


C5P0112N-A
http://www.mouser.com/Search/ProductDetail.aspx?qs=vmaJ%252bUOuvazmwGdXekcXXw%3d%3d

CK1023 D-SHAFT 6.35X38MM
http://www.mouser.com/Search/ProductDetail.aspx?R=CK1023_D-SHAFT_6.35X38MMvirtualkey12200000virtualkey10WC244

A12515RNZQ
http://www.mouser.com/Search/ProductDetail.aspx?qs=sGAEpiMZZMvNbjZ2WlReYh86ZdSEMFJ2%2f84%252b2X8JBB4%3d

Navigation

[0] Message Index

Go to full version