Arcade Collecting > Pinball
Anyone here have experience in repairing williams pinball machines?
shardian:
It kind of matters which fuses were blowing.
dansoftcore:
Well I wasn't the one to work on it but I believe it was either f5 or f6 both of which are on the power supply board.
dansoftcore:
I did notice a line of lights on the top of board will flash like 5 times really fast sometimes when I turn it on if that helps at all.
dansoftcore:
Yeah I was hoping it wouldn't come down to that... =\ I was hoping with what I narrowed down I mite have been able to narrow it down more... and I'm also not sure if its the power supply or the cpu board. I guess If I hook it up to the computer power supply it would narrow it down to the pinballs powersupply... Ah I guess the next time I have a few days off Ill attempt that... I'm just nerves never worked on a pinball machine before ah...
Pinball Wizard:
--- Quote from: dansoftcore on August 03, 2009, 03:08:59 pm ---seeing that it is probably the power supply is it better to just replace it or fix it? The cheapest replacement I can find online is 100 bucks... Id like to fix it but I don't see anything wrong with it everything is putting out what it should and I replaced all the fuses =\
--- End quote ---
You should find a rebuild kit. The PSU is old enough now to need a rebuild kit. I had to do that in my Centaur and it fixed problems I didn't think it was even connected to directly.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version