Main > Main Forum
GaryMcT's 2-player generic control panel layout
Bender:
the U360's are self calibrating
You probably already tried it... but just restart and make sure it's centered and you don't touch it while it loads up
or is it physically out of alignment?
Ginsu Victim:
And have you cleared the gamepad calibration settings in windows?
GaryMcT:
They are both working fine now! Talked to Andy on the phone. Turns out I hadn't reinstalled the washers between the restrictor and the posts. Doh! Now I can play Robotron! :)
Ginsu Victim:
You may have to make some adjustments to the dead zone in MAME for Robotron. My U360s and a friend of mine both had the same issue with that game. The dead zone had to be increased or else it started firing in some directions depending on where the stick settled (since it never quite hits absolute zero).
GaryMcT:
--- Quote from: Ginsu Victim on July 24, 2009, 12:27:00 pm ---You may have to make some adjustments to the dead zone in MAME for Robotron. My U360s and a friend of mine both had the same issue with that game. The dead zone had to be increased or else it started firing in some directions depending on where the stick settled (since it never quite hits absolute zero).
--- End quote ---
Seems to play find in 8-way mode so far.
Is EMDKAY your thing?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version