Main > Main Forum

Mario Bros widebody measurement check

(1/1)

Lost Monkey:
I am in the process of building the Mario Bros widebody cabinet from the plans on Jakobud's site... at least 3/4 finished when I noticed that the plans are very much wrong...

(I have since found threads on this site dated over 2 years old that point this out, yet there is still no change on J's site - I have tried sending a message through his site and get a failed message each time).

If anyone has a dedicated Mario Bros - I need to know the height of the bezel glass and the height of the marquee.  I am going to try and customize this cabinet to fit the original parts and just finish it like a stretched out DK style cabinet with MB trim.

Any help on this would be appreciated.

Thanks!

WunderCade:
I have one.

Wouldn't you want to know the measurements of the actual cab though? It is not only wider than a standard DK cab, but it is taller and the CP is alot higher on a widebody cab than on a standard DK cab.

Lost Monkey:

--- Quote from: WunderCade on June 05, 2009, 09:52:55 pm ---I have one.

Wouldn't you want to know the measurements of the actual cab though? It is not only wider than a standard DK cab, but it is taller and the CP is alot higher on a widebody cab than on a standard DK cab.

--- End quote ---

Those are the differences that make it so much un-like the Jakobud plan...  A Mario Bros widebody is actually more similar to a Punch-Out than a Donkey Kong...

I would want all the measurements if I didn't already have it 3/4 built... unfortunately, all that is left of the outside is putting in the control panel, bezel and marquee.  I don't want to start over, and it is a pretty cool looking cabinet for a mame machine, so I am still happy with it.  This is more of a roadblock than a showstopper.   I just plan on retrofitting the Jakobud plans to fit a real MB CP, bezel and marquee.

If you could measure those for me I would be very grateful!  Thanks!

Searcher7:
I've been asking/looking for the exact plans for Mario Bros. for years with no luck.

It's like everyone with a Mario Bros. cabinet treat the measurements like they're classified secrets.

Darren Harris
Staten Island, New York.

Lost Monkey:

--- Quote from: Searcher7 on June 06, 2009, 04:10:09 pm ---I've been asking/looking for the exact plans for Mario Bros. for years with no luck.

It's like everyone with a Mario Bros. cabinet treat the measurements like they're classified secrets.

Darren Harris
Staten Island, New York.

--- End quote ---

I am finding this out myself...

But, just so anyone who finds this thread using the search function doesn't have to leave empty handed:

The CP (I have found) is 26.5 wide.
The  bezel plexi is 26.25 X 21.75 (according to Bob Roberts).



Navigation

[0] Message Index

Go to full version