Main > Main Forum

Help with Spintrac Minor Connection Problem

(1/2) > >>

Section_25:
Was trying to connect my spinner to my mini-pac yesterday, but I couldn't see how to connect it. The spintrac has the slinder black 4-pin connector and if I'm correct I need to plug it into the bigger white 4-pin connector. I looked on ultimarcs website and it says "The Mini-PAC wiring harness is supplied with an adaptor header". Is this a seperate connector to link these two connectors? I looked carefully through my stuff, but I didn't find any small male pin connector to link these. Should I have gotten this part with the mini-pac? Is there another way to connect these? Was considering cutting the connectors and splicing the wires together directly. Would this be something that can be done? Someone advise please  :-\

AndyWarne:
Can you send me an elaim with your name and I will get one sent.
andy@ultimarc.com

Section_25:

--- Quote from: AndyWarne on May 27, 2009, 05:28:43 pm ---Can you send me an elaim with your name and I will get one sent.
andy@ultimarc.com

--- End quote ---

Thanks Andy!  ;D

I was just looking for a workaround instead of all the hassle of you having to ship it to me. I called around to a few computer shops, but they had a hard time understanding what I was looking for. The ones that did understand what I was telling them I needed were like, " yeah, we don't have anything like that" haha. I gave up after the third shop I called. Wouldn't it work ok to splice the wires together with a wire nut as long as I connected the wires correctly? I really don't mind doing it that way if it won't cause a problem.

mlalena:
I had the same issue.
Had to cut the ends of both wires and replace them with a male & female 4 pin connectors that I got from radio shack.

Also had some issues matching up the colors. Web site pics didn't match the text which didn't match what was shipped. Here's the link to my post
http://forum.arcadecontrols.com/index.php?topic=90929.0

Section_25:

--- Quote from: mlalena on May 28, 2009, 09:30:08 pm ---I had the same issue.
Had to cut the ends of both wires and replace them with a male & female 4 pin connectors that I got from radio shack.

Also had some issues matching up the colors. Web site pics didn't match the text which didn't match what was shipped. Here's the link to my post
http://forum.arcadecontrols.com/index.php?topic=90929.0

--- End quote ---

Thank You!

Actually, I found your thread last night, and copied and pasted the wiring info to a textpad. Yesterday I connected my mini-pac wiring as it was shown on ultimarc's website, but I couldn't get the mini-pac to be recognized in windows at all. I'm going to try again today, I remain optomistic and confident that I will get this cabinet working!  :hissy:

Navigation

[0] Message Index

[#] Next page

Go to full version