Main > Main Forum

6 in 1 JAMMA board compatible with JAMMA+?

(1/2) > >>

CodeWhite:
Hey guys I have a question that maybe you can help me out with. I currently own Ikari Warriors 2, Ikari Warriors 3, and Heavy Barrel pcbs.  I have the opportunity to purchase a working Guerrilla War dedicated cabinet with LS-30 rotational joysticks. Since all these games require rotational joysticks to play, I would love to put them all in the Guerrilla War cab using a 6 in 1 JAMMA pcb. However, I heard that these games all use a JAMMA+ pin-out to accommodate for the extra inputs from the rotational joysticks. My question is: is the 6 in 1 compatible with JAMMA+, would I have to do some sort of mod to the board in order to get it to work, or am I just SOL?
If anybody can help me out I would appreciate it.

CodeWhite

FrizzleFried:
If you're talking about the cheap Chinese junk that Yaton sells,  avoid it unless you're willing to do some serious hacking yourself.   They suck something fierce "as-is"...

tcleary:
my guess is you would have to wire the extra stuff seperately from each board like yourmameman did for using a 6 in 1 for multiple mortal kombats, you have to install some diodes

CodeWhite:
Thanks for the response tcleary. I figured as much. Nothing is ever simple in this hobby.  ;)

srarcade:
I think some of those multi devices don't even run -5V either. I know that was an issue with the midway pcbs.

Navigation

[0] Message Index

[#] Next page

Go to full version