Main > Main Forum
Hooking into computer power switch that has a ribbon cable
mlcampbe:
I would like to hook up an external button to power on my machine. I have read the threads that say to do so the easiest way is to just tap into the wires leading from the motherboard to the power switch. However, in my case the wires are a ribbon cable that has approx 10-12 wires in it. I can't see how that many are needed as the cable runs from the front power switch to the motherboard and the only thing on the front is power, reset, and a led.
What is the best/easiest way to tap into this type of wiring? Can I just remove the ribbon cable and something else?
How do I identify which pins on the motherboard are used by the switch?
thecheat:
What brand of computer do you have? There is a standard that most manufacturers use when they make a board, then there are companies like Dell who do whatever they want since they build their own boards.
I had a heck of a time finding an example of a "standard" connector:
The power button would connect to the two light green pins on the bottom middle. If your pins don't look like that, all bets are off. You could start shorting adjoining pins with a screwdriver slowly, checking if it turns on. There shouldn't be any voltage there to be concerned about but YMMV. You can always backtrace the button leads to the ribbon cable with a meter.
mlcampbe:
Well it is a DELL computer :(
Looking closely I see there are 8 pairs of pins on the motherboard - 16 pins total and the only labelled ones are sleep and pwr on which appear to be 2 sets of pins each.
With this info I think I can start shorting pins but given there are 4 pins are there any gotcha's to look out for?
mlcampbe:
I decided to do some testing - whats the worst that could happen, huh :)
I found that there is indeed a set of pins that turns the machine on and off. Now that I have this I just need to find a way to tap into those pins. What is the easiest way to connect 2 wires to these 2 pins without cutting apart the ribbon cable?
Franco B:
I bought some JST connecters from dealextreme. There $2.98 for 10 with free shipping.
[Linky]
Huge pic alert!
Navigation
[0] Message Index
[#] Next page
Go to full version