Main > Main Forum

Mounting UltraStik 360

<< < (3/3)

Todd H:
I have my U360's bottom mounted in my 5/8" control panel using the longer handles and find the height perfect.

paulscade:
Be sure to consider the orientation when mounting the 360's... they are not square and there is a top/bottom.  When I mounted mine "wrong", I didn't think that it would be too much of an issue (because I could simply program which way is up).... but then I realized that you can't program the direction for the analog mode.

In the end, there was a simple fix that I had overlooked:

http://forum.arcadecontrols.com/index.php?topic=82241.msg896290#msg896290

Kayden:
I top mounted my 360s.  It's only hard if you don't already have a router. 

I had a template that I designed in viso and transfered the dimensions of the metal plate to my CP with carbon paper.  In the center of the joystick hole, I drilled a 1/2" hole and inserted my joystick upside down.  I traced the plastic housing and then cut it out with a jigsaw.  Then I routed out the rest to a depth of about 1/8".  The plate sits flush with the top.

Sorry if this doesn't make as much sense as I want it to, I'm kinda sleep deprived.

Navigation

[0] Message Index

[*] Previous page

Go to full version